Products

MODEL FL161 VIBRATION AMPLIFIER

Description

The Model FL161 amplifies acceleration signal inputs and produces a DC output or 4-20mA current output proportional to acceleration. Constant current excitation is supplied to the accelerometer through the signal input wiring. The unit is mechanically and electrically compatible with Encore's other FlexiLine DIN-rail mounted instrumentation.

 

Specifications

Input: Accelerometer, 100mV/g typically used (not supplied)

Accel excitation: 4mA ±2% at 24VDC to Input connection

Output: Internal jumper selects voltage or 4-20mA current output

Voltage output: DC voltage proportional to acceleration
    

VersionScale factor
-0015Vpk input = 2VDC output
-0025Vrms input = 5VDC output
-0031Vrms input = 5VDC output

Current output: 4-20mA current proportional to acceleration;
4-20mA output replaces 0-2VDC output

Frequency range: 0.5Hz to 2000Hz filtering, or customer specified range to 20kHz

Accel signal output: Buffered accelerometer signal on separate terminal

Connections: Six wireclamp screw terminals accept wire sizes from 24-14 gauge

Mechanical: 2.9" x 3.1" x 0.9" plastic enclosure; mounts on standard 35mm DIN rail

Power: Unregulated 18-30VDC at 30mA max.

 



Terms & Conditions  Privacy Statement  Site Map
® 2007 Encore Electronics All Rights Reserved